THE ELECTRON-BEAM IRRADIATION ON THE HIGH TEMPERATURE SUPERCONDUCTING THIN FILMS: A NUMERICAL SIMULATION OF THE LOW TEMPERATURE SCANNING ELECTRON MICROSCOPY

Low-temperature scanning electron microscopy (LTSEM) is a promising measuring technique for probing the spatial distribution of the superconducting properties of the high-temperature superconducting (HTS) thin films. A theoretical analysis of the electron-beam irradiation on the HTS thin films in the LTSEM has been carried out. An inhomogeneously distributed grain array model has been applied in the analysis, and some numerical sim-ulations have been carried out on the electron-beam induced voltage (EIV) signals in the LTSEM experiments. The comparisons of our numerical results with the LTSEM experi-mental data indicate that it is quite reasonable to use a two-dimensional Josephson junction array for stimulating the inhomogeneous HTS thin film sample. Our numerical results also show that the EIV signals are influenced by the electron-beam power used in the LTSEM, and a reduction of the electron-beam power is suggested in order to eliminate the errors in estimating the local values of critical temperature T_c and critical current I_c by the sample temperature and the bias current at which the first EIV signal occurs.     

V2O5-Ag2O/η-Al2O3催化剂上甲苯氧化制苯甲醛的研究

制备了一系列负载型V—Ag—Al—O催化剂并用于甲苯的气相选择氧化制苯甲醛反应，考察了催化剂组成对反应性能的影响．研究发现，V205负载量为12．5％、Ag2O负载量为7．5％并经773K活化的4号催化剂，在空速467．6h-1，温度663K时反应，得到了甲苯转化率49．58％、苯甲醛选择性29．22％的较好结果．用XRD、XPS、SEM等测试手段，对催化剂进行了结构表征．     

新的酰胺型开链冠醚的合成与性质

Simon在70年代开发了一类酰胺型开链冠醚,能选择性配位碱土金属离子并可作为中性载体制备离子选择性电极.由于酰胺型开链冠醚易于制备,因此受到人们广泛地重视.Vgtle等提出的“末端基”概念为开链冠醚的合成、设计起了重要的指导作用.前文报道2-甲氧基-1-氨甲基萘与三甘醇二碘化物在无水碳酸钠存在下于乙腈中反应得到双手臂的套索冠醚与碘化钠的配合物.X射线衍射晶体结构分析表明萘环上的甲氧基中的氧原子参加了与钠离子的配位,生成了扭曲的六边形双锥结构配合物.因此2-甲氧基-1-氨基萘可以作为开链冠醚的“末端基”.开链冠醚的合成路线是:     

FTIR和ESR法研究离聚体溶液中的离子相互作用

磺化乙丙三元共聚物(SEPDM)离聚体在二甲苯/5％正己醇混合溶剂中具有特异的粘浓关系和粘温关系,估计是由于金属离子被己醇溶剂化而影响离子间相互作用引起的,但尚未有更多的实验数据加以验证.本文用FTIR和ESR方法对SEPDM离聚体溶液作进一步考察,发现金属离子与己醇确实存在溶剂化效应,溶剂化程度与离子的大小、浓度和温度有关,它直接影响离子在溶液中存在的状态(单离子或离子聚集体),这些结果为从分子水平了解离聚体溶液性质提供了理论根据.用波谱方法研究离聚体溶液中的离子相互作用尚鲜见报道.     

表面等离子体子共振技术用于分析手性药物与蛋白作用差异的研究

利用自行设计组装的一套以白色发光二极管为光源的新型表面等离子体子共振传感器实验装置测量了手性药物D-苯甘氨酸与L-苯甘氨酸与人血清白蛋白和鼠血清白蛋白的结合程度, 可以看到这一对手性药物与血清蛋白的结合程度的差异, 通过这种方法可以区分一对手性药物中的不同异构体. 与现在的手性分析方法比较, 这种方法具有不用标记、样品用量少、仪器易于自动化及小型化等优点.     

聚丙烯/POE共混组成对材料断裂行为的影响

采用基本断裂功(EWF)方法对聚丙烯(PP)/聚烯烃弹性体(POE)共混物的注射双边缺口拉伸试样的断裂行为进行了研究,比较了不同POE含量对共混物各断裂参数的影响.结果表明,PP和用量为5phr POE的共混物都可完全满足EWF方法的要求,共混物的断裂韧性-比基本断裂功we,较PP有显著提高;POE用量为10phr以上的共混物则出现明显的成颈现象而限制了EWF方法的应用;PP和各种POE用量的共混物都得到了其屈服所需要的比基本断裂功we,y和比塑性功β′wp,y.     

纳米碳酸锌的制备和热分解动力学参数的测定

Nanosized zinc carbonate was prepared in the droplet of nano-reactor based on microemusion. The influences of the concentration of the surfactant and reactant on the diameter of nanoparticles were studied and the kinetic pa-rameters of thermal decomposition reaction were determined. It can be shown from experimental results， the di-ameter of the droplet in the microemulsion which have dissolved reactant zinc nitrate and sal volatile is between 4.9nm and 7.7nm， 6.2nm and 12.4nm， respectively. Nanosized zinc carbonate prepared by the method of mi-croemusion has shown good dispersion， narrow distribution and light agglomeration. The particle size of nanosized zinc carbonate is between 5nm and 40nm， and its kinetic parameters of thermal decomposition reaction-activation energy E and reaction order n are 110kJ·mol^-1 and 0.9， respectively.     

Williamson法合成两亲性聚醚砜酮-聚乙二醇接枝共聚物

含二氮杂萘酮结构的聚醚砜酮(PPESK)是一种新型的耐热可溶解工程塑料,其玻璃化温度高达263~305℃,可用来制造耐高温气体分离、超滤和纳滤膜,表现出优异的综合性能[1~4].然而,膜材料本身的疏水特性使PPESK膜在过滤操作中易遭受膜污染,导致膜性能下降,对膜材料进行亲水化改性以抑     

合成3,3''''-二吲哚基苯基甲烷的新方法

以无水乙醚为溶剂,室温下无水三氯化铝催化N-(2-氯乙基)苯甲醛亚胺与吲哚反应,合成了3,3'-二吲哚基苯基甲烷和6,12-二苯基吲哚[2,3-b]咔唑,其结构经1H NMR,IR和MS表征.